|
|
 |
Resolution (Still Images)
|
|
Sets the number of pixels used to record images to CF cards.
| Large |
1600 x 1200 pixels |
| Medium |
1024 x 768 pixels |
| Small |
640 x 480 pixels |
|
 |
Resolution (Movies)
|
|
Sets the number of pixels used to record movies to CF cards.
| 640 |
640 x 480 pixels |
| 320 |
320 x 240 pixels |
| 160 |
160 x 120 pixels |
|
 |
Compression
|
|
Sets the relative compression ratio used to record images to CF cards.
|
 |
ISO Speed
|
|
Sets the sensitivity at which images are recorded.
|
When ISO [AUTO] is selected, the camera automatically adjusts ISO between 50 and 150.
Higher ISO speeds increase image noise. To take clean images, use as low an ISO speed as possible.
|
 |
AiAF
|
|
Sets whether or not the camera automatically selects one of three AF frames or a fixed center AF frame.
|
 |
On
(Auto Selection) |
The camera automatically selects the AF frame to focus according to the shooting conditions. |
 |
Off
(Center) |
Of three AF frames, the middle one is selected to focus. This is convenient for making sure the focus is exactly where you want it. |
|
|
The AF frame appears on the LCD monitor. |
|
 |
Digital Zoom
|
|
Sets the whether or not the optical zoom is supplemented by digital processing.
|
|
|
Digital Zoom  |
 |
Self-Timer
|
|
Sets the duration before the self-timer releases the shutter.
|
|
|
Self-Timer Button |
 |
Review
|
|
Sets the duration images display on the LCD monitor after the shutter button is released.
|
|
There are two ways to display the image for longer.
|
|
Keeping the shutter button pressed |
|
|
The image continues to appear on the LCD monitor as long as you keep the shutter button fully depressed. |
|
If you press the SET button while the image is displayed on the LCD monitor |
|
|
It will continue to display even after the shutter button is released. Press the shutter button halfway again to stop displaying it. |
|
|
|
 |
AF-assist Beam
|
|
Turn the AF-assist beam on or off.
|
|
The AF-assist beam will sometimes emit when the shutter button is pressed halfway to assist focusing in certain conditions, i.e. dark conditions.
|
 |
File No. Reset
|
|
Sets how file numbers are assigned to images when new CF cards are inserted.
|
|
Components
prev.